chuggs
Dabbler
- Joined
- Jan 5, 2016
- Messages
- 10
I am posting because I have never experienced anything quite like this, and don’t quite know where to start. Any advice here would be welcome—I built this machine based on advice from this forum, and things have worked beautifully until now.
The situation: this weekend my ZRAID2 volume became degraded due to a disk that just disappeared. The system could not see it at all. This was accompanied by the following system errors:
> (ada4:ahcich4:0:0:0): CAM status: Unconditionally Re-queue Request
> (ada4:ahcich4:0:0:0): Error 5, Periph was invalidated
> GEOM_ELI: Device ada4p1.eli destroyed.
> GEOM_ELI: Detached ada4p1.eli on last close.
> (ada4:ahcich4:0:0:0): Periph destroyed
So, assuming a drive had gone bad, I bought a new one and shut the system down to replace the affected disk. Boom—the system will no longer power on. The motherboard lights indicate that the power is on, and I can connect via IPMI. However, neither the physical power button nor the IPMI power commands will cause the system to power on.
There is an orange light on the motherboard, on LE6. I can’t remember if it was lit back when the system is healthy, and the manual doesn’t give any hint about what it means: http://www.supermicro.com/manuals/motherboard/C224/MNL-1500.pdf
I am at a loss where to go from here. Has anyone experienced something similar? Is it worth trying to call SuperMicro? I have never contacted a board manufacturer, so I don’t quite know what to expect there.
My build:
CPU: Intel Xeon E3-1230 V3 3.3GHz Quad-Core Processor
Motherboard: SUPERMICRO MBD-X10SLM+-F-O uATX
Memory: Crucial 16GB (2 x 8GB) DDR3-1600 Memory
Power Supply: SeaSonic 450W 80+ Gold Certified ATX Power Supply
Storage: 6x 2TB Drives (a bit of a mix of WD drives)
System Disks: Sandisk Cruzer Fit 16GB USB Drive (2x)
Case: Fractal Design Define Mini MicroATX Mini Tower Case
UPS: CyberPower CP850PFCLCD PFC Sinewave UPS 850VA 510W
The situation: this weekend my ZRAID2 volume became degraded due to a disk that just disappeared. The system could not see it at all. This was accompanied by the following system errors:
> (ada4:ahcich4:0:0:0): CAM status: Unconditionally Re-queue Request
> (ada4:ahcich4:0:0:0): Error 5, Periph was invalidated
> GEOM_ELI: Device ada4p1.eli destroyed.
> GEOM_ELI: Detached ada4p1.eli on last close.
> (ada4:ahcich4:0:0:0): Periph destroyed
So, assuming a drive had gone bad, I bought a new one and shut the system down to replace the affected disk. Boom—the system will no longer power on. The motherboard lights indicate that the power is on, and I can connect via IPMI. However, neither the physical power button nor the IPMI power commands will cause the system to power on.
There is an orange light on the motherboard, on LE6. I can’t remember if it was lit back when the system is healthy, and the manual doesn’t give any hint about what it means: http://www.supermicro.com/manuals/motherboard/C224/MNL-1500.pdf
I am at a loss where to go from here. Has anyone experienced something similar? Is it worth trying to call SuperMicro? I have never contacted a board manufacturer, so I don’t quite know what to expect there.
My build:
CPU: Intel Xeon E3-1230 V3 3.3GHz Quad-Core Processor
Motherboard: SUPERMICRO MBD-X10SLM+-F-O uATX
Memory: Crucial 16GB (2 x 8GB) DDR3-1600 Memory
Power Supply: SeaSonic 450W 80+ Gold Certified ATX Power Supply
Storage: 6x 2TB Drives (a bit of a mix of WD drives)
System Disks: Sandisk Cruzer Fit 16GB USB Drive (2x)
Case: Fractal Design Define Mini MicroATX Mini Tower Case
UPS: CyberPower CP850PFCLCD PFC Sinewave UPS 850VA 510W