Scale 23.10.1 and the NVidia A2000

HeloJunkie

Patron

Jan 16, 2024

So I have deployed a couple of new Scale 23.10.1 boxes and had thought that it would support the Nvidi A2000 GPUs based on everything I was reading, however the card is still not recognized after the system has booted. I guess my question is pretty simple, is the A2000 supported by Scale 23.10.1? If so, maybe there is an issue with my X10DRi-T4+ motherboard and not a driver issue.

Thank You

Supermicro Superserver 5028R-E1CR12L
Supermicro X10DRI-T4+ Motherboard
2 x Intel Xeon E5-2695 V4 22 Core 2.1GHz
16 x 16GB PC4-17000 DDR4 2133Mhz Registered ECC
18 x 18TB WD HC550 7200RPM 12GB/s SAS Hard Drives
2 x 9 Drive RAIDZ2 VDEVs
LSI3008 SAS Controller - Flashed to IT Mode (Firmware Version 12.00.02.00)
Dual 920 Watt Platinum Power Supplies
2 x Intel P4600 Series 6.4TB NVMe Drives (Mirrored Boot & Mirrored NVMe Pool)
100GB Melinox CX4 Ethernet Card

TrueScale 23.10.1

APC Smart-UPS RT 3000

225TB Usable

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This is the backup system to my primary NAS
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Supermicro Superserver 5028R-E1CR12L
Supermicro X10DRI-T4+ Motherboard
2 x Intel Xeon E5-2695 V4 22 Core 2.1GHz
16 x 16GB PC4-17000 DDR4 2133Mhz Registered ECC
18 x 18TB WD HC550 7200RPM 12GB/s SAS Hard Drives
2 x 9 Drive RAIDZ2 VDEVs
LSI3008 SAS Controller - Flashed to IT Mode (Firmware Version 12.00.02.00)
Dual 920 Watt Platinum Power Supplies
2 x Intel P4600 Series 6.4TB NVMe Drives (Mirrored Boot & Mirrored NVMe Pool)
100GB Melinox CX4 Ethernet Card

TrueScale 23.10.1.1

APC Smart-UPS RT 3000

225TB Usable

Important Announcement for the TrueNAS Community.

Scale 23.10.1 and the NVidia A2000

HeloJunkie

Patron

Similar threads

Important Announcement for the TrueNAS Community.

Scale 23.10.1 and the NVidia A2000

HeloJunkie

Patron

Important Announcement for the TrueNAS Community.

Related topics on forums.truenas.com for thread: "Scale 23.10.1 and the NVidia A2000"

Similar threads