Corrupted MAC on input / Disconnecting : Packet corrupt

[Christian_128]

Hi

I used freenas until many years, I resolve many problem when I read trean and information on different web page, but now I have special bug, and I not found solution until now.


My setup : Nas-1 and the backup of the first server is Nas-2 all have 4 hard drive in zfs raid, and the server work well. I used few days ago on Nas-1 freenas 0.8.1 and on Nas-2 freenas 0.9.2

Manualy , with my computer (windows 7) on specific time I use putty and "rsync command" on Nas-1 to Nas-2 , whit the command « rsync -e ssh ……» and work perfectly.

I upgrade Nas-1 to 0.9.3 (latest version) 3 january 2015.

I decide to sync my Nas-1 on Nas-2 , look like what I made in the past. . . . but the syncr stop. Ok, is possible one time, I choose to use rsync without ssh, same problem, the action stop again, but faster (less 5 second)

I choose to upgrade the Nas-2 to latest version, 0.9.3

I try to sync Nas-1 to Nas-2 = same problem, sync stop
I decide to use other software for « talking » to the server, maby putty are corrupt, I choose mobaXterm.

I have same problem, the sync stop and I have the message « Corrupted MAC on input / Disconnecting : Packet corrupt » the transfert stop.

I readed some information on the web; if I drop the speed connection between the both NAS, maybe the problem will not occur. The normal connection of the network is 1000baseT, in full duplex. I add a switch for drop speed to 100baseT in full duplex. I have same message but after 5 second, not after 0.3 second.

I try many times, push and pull data = same result. I verrify the netstat of the connection. . . no error happend during anny transfert I made between windows computer to and from Nas-1, plus I try the rsync session, and no error on netstat.

Now I don’t know how is possible to make for resolve this issue, I'm not a expert in linux. When I upgrade the freenas, I upgrade the ZFS pool too, and I think it will not possible to go back, with older version of freenas. The hardware are not changed more than 1 year, and few days before I make the upgrade of freenas, the rsync have succes.

If some one have clue, let me know,

Regards, Christian

( edited for changing the color of the text :) )

 

[Ericloewe]

How about you start by telling us what the hardware is?

And please try to avoid unnecessary color on the text, the reduced contrast makes it more difficult to read.

 

[Christian_128]

Hi, thank's I will avoid color on the text, for the futur.

Why I not insert hardware information on the first post, is because I not want put to much information, and sometime for nothing. I want explane the issue.

this is the hardware configuration of the nas, : NAS-1 and NAS-2 (backup)

NAS-1 specification
BIOS Information
Vendor: Hewlett-Packard
Product Name: HP Compaq dc5700 Microtower
Family: 103C_53307F

Processor Information
Socket Designation: XU1 PROCESSOR
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
Signature: Type 0, Family 6, Model 15, Stepping 6
Version: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
External Clock: 1066 MHz
Max Speed: 6000 MHz
Current Speed: 1867 MHz

Physical Memory Array
Total Width: 64 bits
Data Width: 64 bits
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Total RAM = 8 gig

Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: RJ45
External Connector Type: RJ-45
Port Type: Network Portbge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c0098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
inet 192.168.1.251 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>

Hard Drive : 4 X 2T Western Digital Black


NAS-2 specification (backup)
Manufacturer: Dell Inc.
Product Name: Precision WorkStation T3400
Base Board Information
Manufacturer: Dell Inc.

Processor Information
Socket Designation: CPU
Family: Xeon
Manufacturer: Intel
Signature: Type 0, Family 6, Model 23, Stepping 6
External Clock: 1066 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
Characteristics:
64-bit capable

External Connector Type: RJ-45 (onboard)
Port Type: Network Port
Type: Ethernet
Status: Enabled
Description: Broadcom 5754 NetXtreme Gigabit Controller
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
inet 192.168.1.252 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex,master>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>

Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 8 GB
RAM = 8 GiG

Hard Drive : 4 X 3T western digital red

I know is not big hardware for nas, but they make the job I need for the moment. :)

Regards
Christian

 

[Christian_128]

Hi,
after writed the post yesterday, I want be shure do not have problem with the onboard Network card on the NAS-1, (maybe is the hardware problem ?).

I put new NIC card on the NAS-1, and config on the switch for static IP. the Nas will reconnize the card, and received the right ip adress. :)

I try to sync the NAS-1 to NAS-2 (backup) and same problem, : the transfert stop and I received message : Corrupted MAC on input. Disconnecting: Packet corrupt. :(

I will continu to investigate on this problem, I'm sure I'm not the only one, have this problem

Regards
Christian

 

[cyberjock]

Can you post a debug file please.

 

[Christian_128]

OK, I run the debug file, but: which kind of the debug file do you need ?
-full debug (freenas-debug -? ) or you need specific one ? : hardware? (-h) , network? (-n)

When I make this 3 files, I see inside of the .txt file, is not easy to read.
-do you want the output of the file, joint with the post? (file txt)
or you prefer I copy the output of the terminal direct in the post ?

Christian

 

[Christian_128]

Hi, I joint the debug - n for network, for the both NAS (see .txt file joint)

if you need different debug file, let me know :D

 

[Christian_128]

Hi every one,

I found a solution at the problem what I have: Corrupted MAC on input / Disconnecting : Packet corrupt

first try, I put new nic card on one server. . . same problem
secon try, I put a new network card on second server .. . no problem
maybe the problem was hardware on the network card

this problem is now resolve.

Cheer

Christian

 

[Christian_128]

Hi, .... I have the same problem again, between my both server. I thinked my problem was resolve but not, some time I have same problem and suddenly .... it disapears.

I think 2 years a go the problem was solve but not.

The problem are not the hardware, not the wire, neither network card.

The surprise I have is when I try to sync (rsync) a folder on same server but in other raid... « Corrupted MAC on input / Disconnecting : Packet corrupt » Why this problem when I not pass trought the network, the sync command stay local....

When I use rsync by SSH, I use a PC, this PC have Zone Alarm software for firewall, and I check what happend... for finally discover my Windows firewall are activated too. ?!??! probably during a upgrade Windows for my protection Windows activate them.

I desactivate Windows Firewall, ..... ..... try to sync my both server and "voila" the revelation, the problem it was cause by 2 firewall on my windows machine and the problem start random, If the both firewall are start together the problem start too.

when I resolve this problem, I see the transfering speed are bether.

If some one have this kind of problem, desable your firewall first, may be this will help you